Software Manual

132 ALFOplus 24GHz (North America) - Release 01.05.0x - MN.00395.E - 004
10.2.1 LED status
The visual indication is given by a LED, which can be green or orange or red. The information provided are:
•Red light:
- ON - An internal alarm is active. Connect the PC for troubleshooting
- Flashing - An external alarm is active
Green light:
- Flashing - No radio connection with far-end terminal
- ON - Radio connection with far-end terminal is active
•Orange light:
-During restart
During the power-up follows three status of display Led (see Tab.23
)
Tab.23 - Bootstrap status display
10.2.2 Alarms group
Alarms are divided in groups to refer to a particular functionality and are characterized by programmable
severity.
Alarms, with group and a short description, are listed into Tab.24
.
In the following you can find a class list and the item they describe:
COMMON – Failure or status relevant to whole equipment
ETH LAN - Failure on Ethernet traffic
P.M. ACM - Performance monitoring on ACM
P.M. G.828 – Performance monitoring on signal quality
P.M. Rx Power – Performance monitoring on received signal
P.M. Tx Power – Performance monitoring on transmitted signal
Plug-in module - Alarm on plug-in device
RADIO - Alarm on Tx/Rx section of Radio
SETS - Synchronisation alarm or status
SNTP - Server lost (unavailable in this SW version)
Unit - Hardware or software unit alarm
Led 1st step - boot strap
2nd step - Loading We-
bLCT
3rd step - Ready to
management
Green OFF OFF OFF/BLINKING
Red OFF ON OFF/BLINKING
Orange ON OFF OFF