Software Manual

ALFOplus 24GHz (North America) - Release 01.05.0x - MN.00395.E - 004 123
Fig.92 - Antenna aiming block
9.7 ODU ACCESSING AND REMOTE MANAGEMENT
Local ALFOplus ODU and its remote ODU can be accessed via LAN2 or LAN1 ports depending on supervi-
sioning parameters, once the radio link has been initialized correctly (Local&Remote). In SCT the window
(see Fig.93
) shows the network elements belonging to selected station. In the “login” column you can
check the actual user profile of equipment (System=Administrator; Monitor=Read only) and check the lo-
cal radio (Local) and the remote radio (Remote Link).
To change the User Profile, select the network element and press Login.
To connect to remote radio you can press double click in Remote Link Element or select Remote Link
- Equipment - LCT interface.
In WebLCT software press button Open Far End button to open and manage the remote radio window. If
the remote link is not visible, it means that the Remote Element List is missing in the local ODU (in SCT-
Tools - Subnetwork Configuration Wizard).
2
1
3
5
4
6
9
10
8
7
11
15 mm wrench
32 Nm torque
15 mm wrench
32 Nm torque
15 mm wrench
32 Nm torque
15 mm wrench
32 Nm torque