Tus neeg siv phau ntawv

If you skip these steps on Altos set up, you can change notifications and location services
preferences later in the app settings.
Access to location services is granted only for the purpose of using Bluetooth. Altos does not
collect or use any location data.
Not getting notifications?
If you are not getting push notifications, check whether the Altos app has permission to send
notifications and Altos is connected to your phone.
Charge Altos
Battery charge level is indicated on the display’s segment with the battery icon printed. The
blinking icon indicates the Altos charge level is less than 10%, and it should be charged. You
can check the precise Altos charge level in the app settings.
To charge Altos:
1. Plug the USB Type-C cable into the connector.
2. Connect the cable to a power source.
3. Leave Altos charging for 2-3 hours to get it fully charged.
Trouble charging?
If Altos is not charging when connected to the power source, try to change the USB Type-C
cable or a power outlet.
Unpair Altos of your phone or tablet
To unpair Altos, go to the app settings and tap Unpair device. Then, press and hold the button
on your Altos for three seconds – that will remove your phone from Altos’ known devices.
Turn your Altos off