Instruction manual

CVS-128 System Configuration
0093112802-00 ix
System Configuration
Connection Diagram
red
Black
Note: To use the water temperature sensor / speed sensor,
The wiring of transducer connector has to be changed.
Water temperature sensor
CVS-128 Display unit
With mounting bracket and hard cover
External power output (For GPS etc)
External speaker (For speaker with amplifier)
NMEA circuit input output
GPS sensor (GPS-20A)
External navigation equipment ,
＋
ー
Connection to the Transducer
Connection to the water
Connection to the speed sensor
ST-80/90/100
To Transducer connector
To POWER connector
Standard configuration
Option
Prepared by a user
(J6 connector）
(Prepared by a user)
To External monitor connector
(J7 connector)
External monitor
CW-576-0.5M
(Prepared by a user)
CW-264Ａ-2M
10.8-31.2VDC
CW-840-0.3M
Rubber mold made Equipped with inner-hull
Transducer TD-500T-3B / 501T-3B (Dual frequency combination type 50 / 200 kHz)
Bronze made Equipped with through-hull
Plastic made Equipped with inner-hull
Legend
external water temperature meter
Temperature
/ speed sensor
Transducer TD-500T-2B (Dual frequency combination type 50 / 200 kHz)
Transducer TD-501C (Dual frequency combination type 50 / 200 kHz)