Instruction manual

Chapter 5 Installation CVS-126
5-9 0093132702-01
Connection with Speed Sensor or Water Temperature Sensor (Option)
When installing the optional speed sensor or water temperature sensor, connect to the [TD] connector
together with the transducer via the transducer cable (Type: CW-840-0.3M). For wiring, see the figure
below.
After soldering, implement the waterproof and insulation treatment on the connected part with the
self-melting tape.
Structure of Transducer Cable
Connection Table of Transducer
Transducer Cable Transducer
TD-500T-2 No. of 2 core shield Color of 2 core shield
TD-500T-3
3 Orange Red
4 Shield Shield
5 White White
Connection Table of Speed Sensor and Water Temperature Sensor
Transducer Cable Water Temperature Sensor / Speed Sensor
No, of lead
wire
Color of lead
wire
T-81 ST-80
ST-80-1
ST-90
ST-90-1
ST-100
ST-100-1
1 Blue — Green Green Green
2 Violet — Red Red Red
6 Green Gray White White White
7 Red Gray Brown Brown Brown
8 Black — Shield Shield Shield
2 core shield wire
TD1 (Orange)
TD2 (White)
Shield
SPD.PULSE (Blue)
SPD.VCC (Violet)
SPD.GND (Black)
TEMP.VCC (Green)
TEMP.SIG (Red)
lead wire
To the speed sensor
To the water temperature sensor