Instruction manual

Chapter 5 Installation CVS-126
5-7 0093132702-01
5.4
5.45.4
5.4 Wiring
Connection of Cable to CVS-126 Display unit
Connect the power cable and transducer to the connectors of CVS-126 Display unit.
Pin Assignment of Rear Connector
Pin assignment viewed from the rear of CVS-126 Display unit.
POWER TD
Power input
10.8~31.2VDC
NMEA data input output
GPS, plotter etc
Sonar tone output
Line output for speaker with amplifier
Power output
For power of GPS etc
T
ransducer
For 50/200kHz in common
Speed sensor data input
Water temperature sensor data input
GND
Sonar tone R
Sonar tone L
Power +
GND
NM E
A T
X
-
NM E
A T
X+
NM E
A R
X+
NM E
A R
X
-
Power -
Shield
Sonar tone COM
Outside power
Speed sensor input
Speed sensor power
Transducer input output
Transducer shield
Transducer input output
Water temperature sensor power
Water temperature sensor input
Speed sensor GND
TD
POWER