Instruction manual

CVS-126 Chapter 3 How to use the system menu
3-2 0093132702-01
NMEA Monitor
The external input data can be displayed.
To return to the original menu, press the
【MENU】 key.
NMEA Output Data
The output of NMEA sentence can be set to
ON/OFF.
1 Select the sentence name.
2 Press the 【
】
key.
Prev
DBT
DPT
GGA
MTW
TLL
VHW
VTG
ZDA
ON
ON
OFF
OFF
ON
OFF
OFF
OFF
Return
Prev
Correct
In out
System
Setting
Maintain
3 Select the ON/OFF.
4 Select the [Prev].
5
Press the 【
】
key.
Caution: If you omit steps 4 and 5, the
setting is valid. But, when
selecting the [In out] menu next,
the [NMEA out data] is displayed.
3.3
3.33.3
3.3 Setting of Correct Item
Draft Set
The tolerance of depth can be corrected.
Set the depth from the sea level to the set depth
of your transceiver/receiver. Normally set draft
value of your boat.(setting: expect ft:-10.0～
10.0,ft:-30.0～30.0)
Sonic Speed
Set the [Seawater] or [Freshwater].
Change to meet the usage,
Water Temp
The error of water temp value can be corrected.
(setting:-10.0～10.0℃,-10～10°F)
Boat Speed
The tolerance of boat speed value can be
corrected.
When the [Speed source] is set to the [Sensor], it
is corrected by %. (setting:-50～50%)
When the [Speed source] is set to the [NMEA], it
is corrected by numeral. (setting:-10.0～10.0)
Inner-hull
The signal attenuation value in inner-hull use can
be adjusted.（setting:-10～10: through-hull:0）
3.4
3.43.4
3.4 Setting of System Item
Simple menu
Operation Guide
FUNC.key setting
Language
Return
ON
OFF
Image speed
English
Prev
Correct
In out
System
Setting
Maintain
Draft set
Sonic speed
Water temp
Boat speed
Return
Seawater
0.0m
C
0.0
0%
Prev
Correct
In out
System
Setting
Maintain
Inner-hull
0