Instruction manual

Chapter 3 How to use the system menu CVS-126
0093132702-01 3-1
Chapter 3 How to use the system menu
3.1
3.13.1
3.1 Display of System Menu
After powering on, besides the menu displayed
first with the 【MENU】 key, the system menu, of
which setting is not frequently changed, is
provided.
[In out],[Correct],[System],[Setting],[Maintain]
Display the system menu
1 Press the 【MENU】 key.
2 Select the [Next].
In out
Correct
System
Setting
Maintain
Adjust
Image
D.range
Alarm1
Alarm2
NAV
Disp
Sonar
Next
3 Press the 【
】
key to display the system
menu.
Prev
Correct
In out
System
Setting
Maintain
Adjust
Image
D.range
Alarm1
Alarm2
NAV
Disp
Sonar
Return to the normal menu.
1 Select the [Prev].
2 Press the 【
】
key to display the normal
menu.
3.2
3.23.2
3.2 Setting of External
In/Out
Set the setting related to the input/output.
Buzzer Setting
Temp source
Speed source
Baud rate
NMEA monitor
OFF
Sensor
Sensor
4800
OFF
NMEA output data
Return
Prev
Correct
In out
System
Setting
Maintain
Buzzer Setting
Set the buzzer sound to ON/OFF.
Temp Source
Switch the Sensor/NMEA.
Use the built-in water temp meter for sensor.
Use the external input value for NMEA.
Speed Source
Switch the Sensor/NMEA.
Use the built-in speed meter for sensor.
Use the external input value for NMEA.
Baud Rate
Change the transmission speed of external
input/output.
Match the transmission speed with that of
external equipment connected.(setting:
4800,9600,19200,38400)