Instruction manual

CVS-126 Chapter 2 How to use the Menu
0093132702-01 2-9
Caution: You can switch to other stored
image with the 【
【【
【
】
】】
】
or 【
【【
【
】
】】
】
key.
6 When starting the NAV, press the
【EVENT】key.
7 When you do not start the NAV, press the
【MENU】 key.
2.14
2.142.14
2.14 Store/Recall/Deletion
of Image
Store the image.
The present image of echo sounder can be
stored.
To memorize, it takes some time.
To memorize the image, the 【EVENT】 key
must be switched to the [Store image].
1 Press the 【MENU】 key.
2 Select [NAV] → [EVENT key set].
3 Select the [Store image].
4 Press the 【MENU】 key to close the
menu.
5 When the echo sounder image to be stored
appears, press the 【EVENT】 key.
6 When the image store is fully filled, it
shows that the [Store image] is fully filled.
After deleting the unwanted image, try it
again.
Recall the stored image.
The image stored in the past can be recalled.
During recalling, the image cannot be stored.
1 Press the 【MENU】 key.
2 Select [NAV] → [Image recall].
3 Select the number of image to be recalled
from the [Image recall] list.
Image recall
No. Comment
1
2
3
4
5
6
7
8
9
10
PIC00001
PIC00002
PIC00003
PIC00004
PIC00005
PIC00006
PIC00007
PIC00008
PIC00009
PIC00010
4 After selecting the number, press the 【
】
key or 【Knob】 to enter.
5 Press the 【MENU】 key to return to the
normal menu.
Caution: When other stored image exists
beside the recall image, switch
to other image with the 【
【【
【
】
】】
】
and
【
【【
【
】
】】
】
key.
Delete the stored image.
The image stored in the past can be deleted.
To delete, it takes some time.
1 Press the 【MENU】 key.
2 Select [NAV] → [Image delete].
3 Select the number of image to be deleted
from the [Image delete] list.
Cursor
（
red line
）
H
L
EVENT key set
Store pos
Store image
Homing