Instruction manual

Chapter 2 How to use the Menu CVS-126
2-6 0093132702-01
Setting the alarm
1 Press the 【MENU】 key.
2 Select your desired alarm from [Alarm 1] or
[Alarm 2].
3 Select the [ON] of alarm you desire.
4 If the setting of [Alarm range] is provided in
the alarm desired, select the alarm range.
5 Change the set value of alarm range.
6 Press the 【MENU】 key to close the
menu.
Release the alarm.
1 Press the 【MENU】 key.
2 Select the alarm to be released from
[Alarm 1] or [Alarm 2].
3 Select the [OFF] of alarm to be released.
4 Close the menu with the 【MENU】 key.
Confirm the alarm state.
The set state of [Bottom alarm] and [Fish alarm]
can be confirmed on the bar at the right corner
of display. However, when the display is out of
the range, they are not displayed.
The set state of [Water temp alarm], [Speed
alarm], [Arrival alarm] and [XTE alarm] can be
confirmed by the icons at the upper side of
display.
[Bottom alarm]
[Fish alarm]
[Water temp alarm]
[Speed alarm]
[Arrival alarm]
[XTE alarm]
2.13
2.132.13
2.13 Preset/ WPT edit/ WPT
delete of Destination
NAV Start.
The NAV can be started by selecting the
destination from the destination list.
To perform the NAV start, the destination must
be preset. (See [1.7 Use of 【Event】 key] .)
1 Press the 【MENU】 key.
2 Select [NAV] → [NAV start].
3 Select the [Destination list] preset.
Bottom alarm
Upper depth
Lower depth
Fish alarm
Position
Range
Level
Return
Water temp warm
Upper temp alarm
Lower temp alarm
Speed alarm
Speed limit
Arrival alarm
XTE alarm
NAV alarm range
Return
OFF
5m
50m
OFF
5m
50m
Medium
OFF
C
C
20.0
15.0
OFF
0kt
OFF
OFF
10m
Adjust
Image
D.range
Alarm1
Alarm2
NAV
Disp
Sonar
Next
Adjust
Image
D.range
Alarm1
Alarm2
NAV
Disp
Sonar
Next