Instruction manual

CVS-126 Chapter 2 How to use the Menu
0093132702-01 2-1
Chapter 2 How to use the Menu
2.1
2.12.1
2.1 How to operate the
menu
Display the menu. / Stop the display
of menu.
1 Press the 【MENU】 key.
The menu and explanation of operation are
displayed.
2 Press the 【MENU】 key.
The menu and explanation of operation
close.
Menu Operation
1 When the menu is displayed, press the
【
】
key or 【
】
key to select the menu
name. Depending on the selected menu
name, the content in the set item column at
the right side changes.
(The menu name can be selected by
rotating the 【Knob】.)
Range mode
Shift
Zoom select
Zoom range
Zoom start
Range preset
Return
Manual
0m
10.0m
0m
Bottom
Adjust
Image
D.range
Alarm1
Alarm2
NAV
Disp
Sonar
Next
2 Press the 【
】
key.
The cursor appears in the set item column.
(The cursor appears by pressing the
【Knob】.)
3 Select the set item you desire to change
with the 【
】
key or 【
】
key.
(The set item can be selected by rotating
the 【Knob】.)
Range mode
Shift
Zoom select
Zoom range
Zoom start
Range preset
Return
Manual
0m
0m
10.0m
Bottom
Adjust
Image
D.range
Alarm1
Alarm2
NAV
Disp
Sonar
Next
4 Press the 【
】
key.
The set menu corresponding to the
selected item is displayed.
(It can be displayed by rotating the
【Knob】.)
Shift
10
0~300 m
Range mode
Auto range
Manual
Auto shift
10
5 Change the set content with the 【
】
key
or 【
】
key.
(It can be changed by rotating the [Knob].)
6 Press the 【
】
key.
The cursor returns to the set item column.
(It can be displayed by rotating the
【Knob】.)
7 To select the menu name of other, press
Menu column
Adjust
Image
D.range
Alarm1
Alarm2
NAV
Disp
Sonar
Next
Image speed
IR
Color rejection
Noise rejection
TGV
TX power
Return
1/1
Strong
0%
0
Medium
A
uto
Guide
Name of menu selected
Setting item column
I t is displayed when the [Operation Guide] is set to ON.
(See [3.4 Setting of System Item].)
Setting value
Cursor