Product Manual

TROUBLESHOOTING
Configuration failed
Check your password, Make sure you are on a 2.4GHz network.
Make sure your phone is within a few feet of the Smart Oil Meter during
the entire configuration process.
Check if your Wi-Fi is in good condition, or you can try to get closer to the
router and configure.
Check if there is a red light under the black battery box. It should flash
twice per second in configure mode, If there is no red light, spin the
batteries and try again.
Note: Please DO NOT hold on the configuration button after the device is
successfully connected, or it will trigger a device reset, which will require
you reconnect or delete the device and reconnect.
Help
If you have any questions, you can contact us by clicking on "Messages" in
the home page.
Email：[e-mail]