Manual

38
6. Press " ", the previous switch-on time is displayed by default. Press " "
continuously to set the switch-off time. For example, the switch-off time is set at 13:00 (the
display shows this), (Note: The switch-off time must be set later than the switch-on time. If
the switch-on time coincides with the switch-off time, the unit is in standby mode): see
below: E.
A
B
C
D
E
7. Press " / " to set the target temperature (temperature range 10-49℃).
8. Repeat steps 2-7 above to set the entire weekly programme (each day the work of each
section is opened and the switch-off time is set).
9. After the above setting, press " " to select the day of the week of switch-on, then press
" " to select the switch-on time of the day, then press " / " to set the desired
temperature (temperature range 10-49℃), press " " to confirm the setting.
10. To deactivate the weekly function, press " " again, the "P" light goes out. The weekly
programme is switched off. The product returns to the previous working status.
Hint:
• After completing the above settings and when the programme is running, press " /
/ / " to check the setting time for each day and time period.
• The switch-on time periods from 00~24 hours cannot be set to minutes;
• The "TIME/OFF" cannot be smaller than "TIME/ON";
• When "TIME/ON" coincides with "TIME/OFF", the period goes into standby mode;