Manual

36
6. Appointment "ON": In standby mode, press the " " timer button to set the appointment
switch-on time in a range of 00-12 hours. When the setting is complete, the display shows
the entered switch-on time and the " " indicator lights up. The display automatically
shows a time reduced by one hour when one hour has passed. When the appointment
switch-on time is reached, the appliance switches on automatically. The default setting
temperature at appointment switch-on time is 23 ℃. The following photo shows an example
of setting the appointment switch-on time to 8 hours:
Note: If the temperature and weekly programme are not set, the appliance switches
off automatically after 12 hours of continuous operation and goes into standby
mode.
Operation of the unit with remote control:
Note: During remote control operation, the remote control transmitter must be aligned with
the reception range of the product to ensure effective control. The remote control buttons
"Standby" " ", "Mode" " " and "Pan" " " have the same function as the
corresponding buttons on the unit itself.
Set current TIME / DAY (can be set in standby mode as well as in working mode):
1. Press the button " " once, the display shows "12" as the default value. Press " /
" to set the current hour (24 hours in total). Press " " again, the display shows "30" as
the default value for the minute. Press " / " to set the current minute (00-59 minutes).
Then press " " for the third time, the display shows the day " ". Press " / " to
set the current day (Monday to Sunday: d1-d7). Finally, press " " to confirm the setting. The
display shows the previous settings.
Example: If you want to set under a heating power of II 25 ℃ on Wednesday at 9:30 a.m.,
please refer to the following photos:
A B C
Hint:
If the main switch is turned off, the power is interrupted or the plug is pulled out, the
unit must be reset.
Press " " to check the current time and day of the week in sequence.