Manual

34
Wall mounting! Attention!
The lowest point of the unit must be 180cm above the floor when mounted!
Mount the mounting bracket on top of the fan heater with the short side facing the wall. Mark the
drill hole on the wall and remove the bathroom fan heater again.
Drill two holes (8 mm) in the wall at the selected and marked position - horizontally and with a
distance of 18.7 cm.
Insert the dowels into the holes and screw in the screws (included). Let the screws protrude
approx. 5 mm.
Hook the fan heater with the fixing brackets onto the screws, push it all the way to the left and pull
it down.
Commissioning and function
- The main switch must be off (O).
- Unroll the power cable completely and insert the plug into a suitable 220-240 V~ socket.
- Press the main switch (I). The display shows 'S' (standby mode).