XPC User Guide For the : XS35GS V2
Shuttle® XPC Installation Guide Copyright ©2012 by Shuttle® Inc. All Rights Reserved. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise, without prior written permission from Shuttle® Inc.
Safety Information Read the following precautions before setting up a Shuttle XPC. CAUTION Incorrectly replacing the battery may damage this computer. Replace only with the same or equivalent as recommended by Shuttle. Dispose of used batteries according to the manufacturer's instructions. Laser compliance statement The optical disc drive in this server is a laser product. The drive's classification label is lacated on the drive. CLASS 1 LASER PRODUCT CAUTION： INVISIBLE LASER RADIATION WHEN OPEN.
TABLE OF CONTENTS Driver and Software Installation........................................................1 Motherboard Driver DVD.......................................................1 User Manuals.........................................................................2 BIOS SETUP.....................................................................................3 1.1 About BIOS Setup............................................................3 1.1.1 When to Use BIOS Setup ?.....................
English Driver and Software Installation Motherboard Driver DVD The DVD contents attached in XPC motherboard are subject to change without notice. The Motherboard Driver DVD contains all the motherboard drivers necessary to optimize the performance of this XPC in a Windows® OS. Install these drivers after installing Microsoft® Windows®. Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen should appear.
English User Manuals Motherboard Manual Quick Guide
English BIOS SETUP 1.1 About BIOS Setup 1.1.1 When to Use BIOS Setup ? You may need to run the BIOS Setup when: ・ An error message appears on the screen during the system booting up and is requested to run SETUP. ・ You want to change the default settings for customized features. ・You want to reload the default BIOS settings. 1.1.2 How to Run BIOS Setup ? To run the BIOS Setup Utility, turn on the notebook and press the [Del] key during the POST procedure.
English 1.2 BIOS Setup Menu Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. Select the tags to enter the other menus. Info Menu Show System Information about BIOS version,CPU features and Manufacturer Main Menu Show system overview about memory size, main HDD or ODD and setting of system time and date.
English 1.2.1 Info Menu ・System Information This item provides the information about the firmware, processor, and system memory.
English 1.2.
English ・System Date This item allows you to set the system date. The date format is [day:month:date:year]. Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. ・System Time This item allows you to set the system time. The system clock will go on no matter you shut down the PC or get into sleep mode. The time format is [hour:minute:second]. Use [+] or [-] to configure system Time.
English Day Day of the week, from Sun to Sat, which is determined by BIOS (read-only). Month (Month) The month from 01 (January) to 12 (December). Date (Date) The date from 01 to 31. Year (Year) The year can be adjusted by users. ・AHCI Port0 While entering setup,BIOS auto detects the presence of AHCI devices. This displays the status of auto detection of AHCI devices.
English 1.2.3 Advanced Menu ・Execute-Disable Bit Capability [Enabled]: When disabled, force the XD feature flag to always return 0.
English 1.2.4 Security Menu ・Change Supervisor Password When this item is selected, a message box shall appear on the screen as below: Enter New Password Type a maximum of 6-digit password and press [Enter]. The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abandon new password setting. When the Supervisor Password is set, new items Change User Password and Password Check will be added in the menu.
English same as Change Supervisor Password item above. Note that Supervisor Password field allows users to enter and change the settings of the BIOS SETUP UTILITY, while User Password field only allows users to enter the BIOS SETUP UTILITY without having the authorization to make any change. The Password Check item is used to specify the type of BIOS password protection that is implemented.
English 1.2.5 Boot Menu ・Boot Configure Settings during System Boot. ・LAN Remote Boot [Enable]: Boot from LAN or not. ・1st Boot Device ・2nd Boot Device ・3rd Boot Device Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu.
English 1.2.
English ・Save & Exit Setup Exit system setup after saving the changes. F10 key can be used for this operation. ・Discard Changes and Exit Exit system setup without saving any changes. ESC key can be used for this operation. ・Discard Changes Discards changes done so far to any of the setup questions. F7 key can be used for this operation. ・Load Default Settings Load Optimal Default values for all the setup questions. F9 key can be used for this operation.
