Datasheet

Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
Pa
g
e 12
|
19 A
p
ril 2011
©2011 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
(7) Please insert a 2.5 inch S-ATA hard disk
with the connectors facing towards the
metal sheet into the drive cage. Please
then fix the hard disk with four screws and
carefully push it in afterwards to connect it.
Please fix the drive cage with four screws.
(8) Now install the memory modules and
make sure they are clicked into place
properly. Please see the notch when
installing the module to make sure it faces
in the right direction.
(9) Optionally a COM/LPT adapter (PCL68)
can be installed. This adapter is to be
connected to the mainboard via a ribbon
cable. The connectors of the ribbon cable
have one securing clip each that needs to
be pushed forward first. Having then
connected the ribbon cable to the
mainboard, the cable is to be fixed with
the securing clip with the contacts of the
cable facing towards the board. Please do
not forget to lead the cable through the
ferrite core.