Datasheet

Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
Pa
g
e 11
|
19 A
p
ril 2011
©2011 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
(3) Loosen the four cross-head screws (or
Phillips screws) to remove the stand.
Remove the four cross-head screws that fix
the case cover.
(4) The case cover is clicked into place by
several hooks. At the bottom of the case is
a notch that can be used to lever the case
cover out of place by carefully using a
screwdriver or plastic card. Be sure to
apply only little force in order not to break
the hooks.
(5) As the next step, remove the large
electromagnetic shielding (EMI cover). This
metal sheet is fixed by three cross-head
screws.
(6) Another shielding is fixed by four screws.
Only remove this part to install or
exchange memory modules. Loosen the
four screws of the drive cage and remove
the latter.