Owner's Manual

22
English
appears. Type the password and press <Enter>. The screen does not display
the characters entered. Retype the password as prompted and press <Enter>.
If the password confirmation is incorrect, an error message appears. The
password is stored in NVRAM after BIOS completes.
Change User Password
Select Change User Password from the Security Setup menu and press
<Enter>.
Enter New Password:
appears. Type the password and press <Enter>. The screen does not display
the characters entered. Retype the password as prompted and press <Enter>.
If the password conrmation is incorrect, an error message appears. The pass-
word is stored in NVRAM after BIOS completes.
Boot Sector Virus Protection
This option is near the bottom of the Security Setup screen. The Optimal and
Fail-Safe default setting is Disabled.
[Disabled] Set this value to prevent the Boot Sector Virus Protection.
This is the default setting.
[Enabled] Select Enabled to enable boot sector protection. Bios displays
a warning when any program (or virus) issues a Disk Format
command or attempts to write to the boot sector of the hard disk
drive. If enabled, the following appears when a write is attempted to
the boot sector. You may have to type N several times to prevent the
boot sector write.
Boot Sector Write!
Possible VIRUS: Continue (Y/N)? _