Owner's Manual

10
English
Block (Multi-Sector Transfer)
This option sets the block mode multi sector transfers option. The Optimal and
Fail-Safe default setting is Auto.

The choice: Disabled,Auto.
PIO Mode
IDE PIO (Programmable I/O) mode programs timing cycles between the IDE
drive and the programmable IDE controller. As the PIO mode increases, the cycle
time decreases.

The choice: Auto,0,1,2,3,4.
DMA Mode
This setting allows you to adjust the DMA mode options.

The choice: Auto,SWDMAn, MWDMAn, UDMAn.
S.M.A.R.T. for Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) feature can help
predict impending drive failures.

The choice: Auto,Enabled,Disabled.
32Bit Data Transfer
This option sets the 32-bit data transfer option.

The choice: Enabled, Disabled.
****************************************************************************************