Datasheet

Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
©2006 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
Page 7 | 18 July 2008
Back panel
connectors
6x USB 2.0
2x GigaBit LAN (RJ45)
2x External Serial ATA (eSATA) with power port
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
Digital Audio S/PDIF output: optical and coaxial
Audio Line-in
Audio Microphone input
Clear CMOS button
Wireless LAN Antenna
Other
connectors
4x USB 2.0 (two sets with 2x5 pins)
4x fan connectors (3x 4 pins, 1x 3 pins)
Headers for PS/2 mouse and PS/2 keyboard
CIR header
Accessories
Multi-language XPC manual
Quick guides for Bluetooth (BT12) and WLAN (PN20)
Driver DVD with software (Norton Internet Security 2007, Adobe Reader)
Data cables: 1x floppy, 1x PATA, 3x SATA (PATA/2xSATA preinstalled)
1 set to 2 set 6-pin VGA power cable
2x CrossFire bridges for ATI graphics cards
USB cable (type A-to-A) for USB Speedlink function
1 set 4 pin to SATA power cable
Dipole antenna for the pre-installed WLAN module
AC Power Cord
2x additional Front feet, Screws, Heatsink Compound
*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using
third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the
components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held
responsible for possible damage caused by overclocking.
**) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter
- a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.