XPC User Guide For the : SH67H3/SH67H7
Shuttle® XPC Installation Guide Copyright ©2010 by Shuttle® Inc. All Rights Reserved. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise, without prior written permission from Shuttle® Inc.
Safety Information Read the following precautions before setting up a Shuttle XPC. CAUTION Incorrectly replacing the battery may damage this computer. Replace only with the same or equivalent as recommended by Shuttle. Disposal of used batteries according to the manufacturer's instructions. Laser compliance statement The optical disc drive in this server is a laser product. The drive's classification label is lacated on the drive. CLASS 1 LASER PRODUCT CAUTION：NVISIBLE LASER RADIATION WHEN OPEN.
TABLE OF CONTENTS Driver and Software Installation...................................................................................1 Mainboard Driver DVD ............................................................................................1 User Manuals ..................................................................................................2 Appendix......................................................................................................................3 Starting BIOS........
English Driver and Software Installation Motherboard Driver DVD The DVD contents attached in SH67H3/SH67H7 Series motherboard are subject to change without notice. The Motherboard Driver DVD contains all the motherboard drivers necessary to optimize the performance of this Shuttle Xvision in a Windows® OS. Install these drivers after installing Microsoft® Windows®. Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen should appear.
English User Manuals Motherboard Manual Quick Guide
English Appendix Starting BIOS AMIBIOS has been integrated into many motherboards for over a decade. In the past, people often referred to the AMIBIOS setup menu as BIOS, BIOS setup, or CMOS setup. American Megatrends refers to this setup as BIOS. Specifically, it is the name of the AMIBIOS8 BIOS setup utility. This chapter describes the basic navigation of the BIOS setup screens. Enter the BIOS To enter the BIOS setup screens, follow the steps below: Step1. Power on the motherboard. Step2.
English AMIBIOS8 has default text messages built into it. The motherboard manufacture retains the option to include, leave out, or change any of these text messages. They can also add their own text messages. Because of this, many screen shots in this manual are different from your BIOS setup screen. The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process.
English Main Setup When you first enter the BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below. System Time/System Date Use this option to change the system time and date. Highlight System Time or System Date using the keys. Enter new values through the keyboard.
English Advanced Select the Advanced tab from the BIOS setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages.
English ACPI Settings System ACPI Parameters. ACPI Sleep State Select the highest ACPI Sleep state the system will enter when the SUSPEND button is pressed. The choice: S1 (CPU Stop Clock) , S3(Suspend to RAM) Resume by RTC Alarm Enable or disable System wake on alarm event., When enabled, System will wake on the hr::min::sec specified. The choice: Enabled , Disabled. Wake On LAN Function Enable or disable system wake on LAN chip event. The choice: Enabled , Disabled.
English CPU Configuration You can use this screen to select options for the CPU Configuration Settings. Use the up and down keys to select an item. Use the and keys to change the value of the selected option. A description of the selected item appears on the right side of the screen. The settings are described on the following pages. An example of the CPU Configuration screen is shown below. The CPU Configuration setup screen varies depending on the installed processor.
English Limit CPUID Maximum Disabled for Windows XP. The choice: Enabled , Disabled. Execute Disable Bit XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, RedHat Enterprise 3 Update 3.) The choice: Enabled , Disabled. SATA Configuration SATA Devices Configuration. SATA Mode (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode.
English Intel IGD Configuration Intel IGD Function. DVMT Mode Select Select DVMT Mode used by Internal Graphics Device. The choice: Fixed Mode , DVMT Mode. DVMT / FIXED Memory Select DVMP/FIXED Mode Memory size used by internal Graphics Device. The choice: 128MB , 256MB, MaxImum.
English USB Configuration USB Configuration Parameters.
English Super IO Configuration You can use this screen to select options for the Power Management Configuration. Use the up and down keys to select an item. Use the and keys to change the value of the selected option. The settings are described on the following pages. The screen is shown below. PWR-On After PWR-Fail The system will be restore automatically to the previous power state before the power failure occurs. The choice: Enabled , Disabled.
English Serial Port Configuration You can use this screen to select options for the Hardware Health Configuration. Use the up and down keys to select an item. Use the and keys to change the value of the selected option. The settings are described on the following pages. The screen is shown below. Serial Port Enable or Disable Serial Port (COM) The choice: Enabled , Disabled. Cgange Settings Select an optimal setting for Super IO device.
English CIR Controller Configuration Set Parameters of CIR Controller (CIR) CIR Controller Enable or Disable CIR Controller The choice: Enabled , Disabled.
English H/W Monitor Monitor hardware status. Fan Speed Control Fan Speed Control function. The choice: Smart Fan Mode , Ultra-Low Speed, Low Speed , Mid Speed , Full Speed. Power LED Brightness Power LED Brightness Control function. The choice: Auto , Low Brightness , Mid Brightness , High Brightness.
English Voltage Configuration You can use this screen to select options for the Hardware Health Configuration. Use the up and down keys to select an item. Use the and keys to change the value of the selected option. The settings are described on the following pages. The screen is shown below. CPU Voltage Set CPU Voltage Set Parameter. The choice: Auto , +50mv , +100mv , +150mv , +200mv , +250mv , +300mv. CPU VTT 1.05 Voltage S CPU VTT 1.05 Voltage Set Parameter.
English SB 1.05 Voltage Set SB 1.05 Voltage Set Parameter. The choice: Auto , +50mv , +100mv , +150mv , +200mv , +250mv , +300mv. Integrated Graphic Vol Integrated Graphic Voltage Set Parameter. The choice: Auto , +50mv , +100mv , +150mv , +200mv , +250mv , +300mv.
English Chipset Initate Graphic Adapte Select which graphics controller to use as the primary boot device. The choice: IGD , PEG/IGD. IGD Memory IGD Share Memory Size. The choice: IGD , 32M , 64M , 128M . High Precision Timer Enabled/Disabled the High Precision Event Timer. The choice: Enabled , Disabled.
English Boot Select the Boot tab from the BIOS setup screen to enter the Boot BIOS Setup screen. You can select any of the items in the left frame of the screen, such as Boot Settings Configuration, to go to the sub menu for that item. You can display an Boot BIOS Setup option by highlighting it using the keys. All Boot BIOS Setup options are described in this section. The Boot BIOS Setup screen is shown below. The sub menus are described on the following pages.
English Security Select the Security tab from the BIOS setup screen to enter the Security BIOS Setup screen. You can display an Security BIOS Setup option by highlighting it using the keys. All Security BIOS Setup options are described in this section. The Security Setup screen is shown below. The sub menus are documented on the following pages.
English Select Change User Password to give or to abandon password setting same as Change Supervisor Password item above. Note that Supervisor Password field allows users to enter and change the settings of the BIOS SETUP UTILITY, while User Password field only allows users to enter the BIOS SETUP UTILITY without having the authorization to make any change. The Password Check item is used to specify the type of BIOS password protection that is implemented.
English Save & Exit Select the Exit tab from the BIOS setup screen to enter the Exit BIOS Setup screen. You can display an Exit BIOS Setup option by highlighting it using the keys. All Exit BIOS Setup options are described in this section. The Exit BIOS Setup screen is shown below.
English Save Changes and Exit When you have completed the system configuration changes, select this option to leave BIOS Setup and reboot the computer so the new system configuration parameters can take effect. Select "Save Changes and Exit" from the Exit menu and press . Save Configuration Changes and Exit Now? [Ok] [Cancel] appears in the window. Select Ok to save changes and exit. Discard Changes and Exit Exit system setup without saving any changes.
