Datasheet

Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
Pa
g
e 6
|
19 A
p
ril 2011
©2011 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
Expansion
Slots
1 x PCI-Express x16 v1.0 (for graphics cards only)
1 x PCI (32 Bit)
Supports Dual-slot (double-width) PCI Express x16 graphics cards,
however, you cannot use the PCI slot in this case. ***)
If a discrete graphics card is used, the onboard graphics will be deactivated.
Integrated
Graphics
Intel Graphics Media Accelerator X4500 (GMA X4500)
Supports Microsoft DirectX 10, Shader Model 4.0 und OpenGL 2.0
Supports Intel Clear Video Technology with ProcAmp color control
Maximum DVI resolution: 2048x1536
Max. shared video memory size (UMA): 1759MB**)
Dual View: Analog VGA and digital DVI outputs
Two video outputs can be used at the same time
Supports dual independent display
5.1-channel
Audio
Audio Codec: IDT 92HD89C, 5.1 channel
Three analog audio connectors (3.5mm) at the Back-Panel:
1) Front Line out (head phone)
2) Rear Surround line-out (shared with microphone input)
3) Center line-out (shared with Line in)
Front panel: microphone input and head phone output
Gigabit-LAN
Controller
Marvell 88E8057 Ethernet network controller (Gigabit)
Supports 100 / 1.000 MBit/s operation (100Base-TX/1000Base-T)
Supports Wake-on-LAN (WOL)
Drive
connectors
3x Serial-ATA II, 3 Gbit/s (300 MB/s) bandwidth
1 x IDE ATA 100 drives
Pre-installed cables: 1x SATA, 1x IDE (or 2x SATA suject to availability)
Front panel
connectors
Microphone (3,5 mm)
Headphone /Line-out (3,5 mm)
2x USB 2.0 (Hi-Speed)
Power button
Power on LED (blue)
Hard disk read/write LED (orange)
Back panel
connectors
DVI-D output (24 pin, digital)
VGA output (D-Sub, analog)
4x USB 2.0 (Hi-Speed)
GigaBit LAN (RJ45)
PS/2 keyboard (6-pol. Mini-DIN)
PS/2 mouse (6-pol. Mini-DIN)
Audio Line in, Line out, Microphone (shared with 6-ch line out)
Clear CMOS button
Optional: Serial and parallel port ***)