Datasheet

P
r
oduct Specification
www.shuttle.eu
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
Pa
g
e 6
|
31 Januar
y
2012
©2011 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
Onboard
Connectors
4x Serial ATA rev. 2.0, max. 3 Gbit/s (onboard)
2x USB 2.0 (2x5 pins) - occupied by front panel
1x RS232 serial interface (2x5 pins)
2x fan connectors (4 pins and 3 pins)
Audio AUX input
Power supply
250 Watt mini power supply unit
Input voltage range: 100~240V
Connectors: 20-pin ATX, 4-pin ATX12V
Other connectors: 4x SATA, 2x Molex, 1x Floppy
Graphics power connector: 6 pins
Active PFC (Power Factor Correction)
Environmental
criteria
Operating temperature: 0~35°C
Humidity: 10~90%
Warranty 24 Months Pick-Up-And-Return Service
Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
*) Overclocking Warning:
Please note there is a certain risk involved with overclocking, including adjusting the settings in the BIOS or using
third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the
components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held
responsible for possible damage caused by overclocking.
**) Unified Extensible Firmware Interface (UEFI) – required when booting from hard disks larger than 2.2 TB under
Windows 64 bit operating systems such as Windows 7, Windows Vista SP1 and Windows Server 2008/2003 SP1.
***) Open-ended PCI-E slot - The X1 slot uses an open-ended socket to permit physically longer cards (e.g. X4 or
X8) while the speed is limited to X1.