Datasheet

Product Specification

www.shuttle.com

Shuttle Computer Handels GmbH

Fritz-Strassmann-Str. 5

25337 Elmshorn | Germany

Tel. +49 (0) 4121-47 68 60

Fax +49 (0) 4121-47 69 00

sales@shuttle.eu

e 1

3 Au

2010

VESA mount accessory PV01

compatible to the XS35 series

Its optional VESA75/100 wallmount allows it to be installed on to walls

or just affixed on the rear side of a monitor which is particularly

interesting for the industry segment, company buildings and public

institutions.

Feature Highlight

Scope of

delivery

• VESA mount

• 4 screws

Compatibility

• Compatible with Shuttle XS35 series

• Supports 75 and 100mm standards

Shutt

e Accessor

PV01

Article number: PV01

Images for illustration purposes only.

PAGE 1
Product Specification Shuttle Accessory VESA mount accessory PV01 compatible to the XS35 series PV01 Its optional VESA75/100 wallmount allows it to be installed on to walls or just affixed on the rear side of a monitor which is particularly interesting for the industry segment, company buildings and public institutions.
PAGE 2
Product Specification XPC Accessory PV01 – Installation Guide c d Due to safety reasons, please turn off your computer completely first and unplug it from the power supply. Unscrew one screw of the stand mount and remove the vertical stand. Fasten the VESA MOUNT at rear of LCD monitor with four screws. As shown, install the XS35 in the VESA MOUNT and push it towards the direction as indicated by the red arrow. g Check that it is properly aligned, then tighten securely with one thumbscrew.