Datasheet

Product Specification
www.shuttle.com
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
Pa
g
e 4
|
23 Januar
y
2013
©2013 Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purpose only.
VESA mounting
The stand on the rear can easily be removed to unveil four VESA
mounting screw holes that can be used for mounting arms and other
mounting devices from a variety of manufacturers.
4 Point Touch Screen Calibration
The X50V3L features a precise touchscreen input device. This can
easily be calibrated with the eGalax touch software by just pointing on
each corner of the screen using the stylus pen. With this four-point
calibration, you can use demanding graphical user interfaces (GUI)
that require precise cursor control to properly activate small icons,
buttons, scroll bars, etc.
Optional serial and parallel legacy ports
Legacy ports are widely popular among industrial applications. Thus,
the X50V3L optionally provides one parallel and two serial ports on the
back panel (Accessory PLC69).
Tiny power adapter
The external 40W power adapter is virtually noiseless and can easily be
hidden behind the desk thanks to its tiny dimensions.
Dimensions: 89.5 x 37 x 26.5 mm (LWH) = 88ml
24/7 nonstop operation
The Shuttle All-in-One PC X50V3L is officially approved for 24/7
permanent operation. Thanks to its low power consumption and
completely passively cooling, this PC runs highly reliable making it
perfectly suitable for digital signage and POI/POS applications.
Conditions for permanent use:
- Ambient temperature while under load: 5-35°C
- Air humidity while under load: 10-80% (not condensing)
- Free circulation of air amongst the PC must be guaranteed
- Ventilation holes must be clear
- If a hard disk is installed, this must also be approved for permanent
operation by its manufacturer.