Instructions

Product Specifications
w w w . s h u t t l e . e u
Shuttle C omputer Handels G m bH
Fr itz -Stra ssma nn- St r . 5
25337 Elmshor n | German y
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121 -47 69 00
E- Mail: s ales@ sh utt le. eu
Page 5 | 25 October 2019
Shuttle XPC all-in-one P51U Special Features
All applications at your fingertips 10-point multitouch
The innovative touchscreen technology delivers the simplest operation
possible and makes the screen the centre of action. Its high-quality
design gives you access to all capabilities of the PC - by just touching
the screen.
24/7 nonstop operation
The Shuttle XPC all-in-one P51U is officially approved for 24/7
permanent operation. Thanks to its low power consumption and
completely passive cooling, this PC runs highly reliable making it
perfectly suitable for digital signage and POI/POS applications.
Conditions for permanent use:
Ambient temperature while under load: 5 - 40 °C
Air humidity while under load: 10 - 80 % (not condensing)
Free circulation of air amongst the PC must be guaranteed
Ventilation holes must be kept clear
If a hard disk or SSD is installed, this must also be approved for
permanent operation by its manufacturer.
Fanless and quiet
The Shuttle XPC all-in-one P51U uses a passive thermal module to lead
heat out of the case quickly and evenly. The unique fanless design
makes the P51U perfect to be used in noise-sensitive environments. As
an additional benefit, fanless cases rarely gather dust on the inside
and stay cleaner than others. So it is not only quiet and low in energy
use, but also virtually maintenance-free.
Protection Class IP54
The front panel of the Shuttle XPC all-in-one P51U is dust-protected and
protected from splashing of water according to IP protection class 54.
Consequently, this All-in-One PC can be used for those indoor
applications, where the touchscreen may be exposed to humidity and
occasional splashing of water. This is particularly welcome in
restaurants, laboratories, production or other places.
Optimised Cable Management
Most of the connectors are now located at the back panel facing
down. This leads to an effective cable management making for a
clean, tidy appearance on the desk.
On the left side sit those connectors which need to be accessed from
the front: the card reader and two USB ports.