User manual

English

3-41

usb ManaGeMent web interFace

USB Management

The USB management function allows you to setup Printer Settings and Auto Copy for devices

connected to the OMNINAS through the USB ports.

Printer Setting

You can enable or disable connected USB printers in the Printer Setting menu.

Note:

A USB printer must be connected prior to the following instructions.

1. From the Home menu, select USB and click Printer Setting.

All connected printers are visible in the Printer Setting menu.

2. Select Disable from a printer to disable network discovery.

Disabling Printer

Once a printer is enabled for network discovery, the printer is visible to users within the

same subnet. Users can install the printer to their local computer. Printer drivers may be

required for installation.

Adding a Printer in a Windows System

1. Connect the printer to a USB port. We recommend connecting to a USB2.0 rear port. See Rear View.

2. Login in to the web interface and make sure the printer function is not disabled. See Disabling Printer in the

previous gure.

3. On the Windows Start menu, choose Devices and Printers.

Start Menu