User manual

English

3-21

storaGe ManaGeMent web interFace

3. Press the Hot-swap button (front panel) until an audible beep sounds and the LED starts to

blink. See following gure.

Hot swap button

Hot Swap Button Function

Replace the drive. Once inserted, an audible sound alerts that the HDD is replaced. The

status LED ashes red.

After a short time, the Status tab in Disk Manager detects and displays the new HDD sta-

tus.

To replace a drive using the Disk Manager menu:

1. Log in to the OMNINAS web interface.

2. Click on Storage -> Disk Manager to view your available disk drives.

3. Select your target drive and click Remove Disk.

Hot Swap Through Disk Manager