User manual

English

3-17

storaGe ManaGeMent web interFace

IMPORTANT:

Changing RAID types erases all data stored on your storage disks. If there is saved data

on the drive(s), backup your data before proceeding.

IMPORTANT:

Only RAID 1 supports hot-swap functionality. All other modes require you to power down

the device before removal of hard drives.

The Disk Manager function displays model, capacity and status of the available hard drives. You

can view the health status, remove, check, format, and unmount a disk drive.

Creating a RAID Mode

IMPORTANT:

Changing RAID types erases all data stored on your storage disks. If there is saved data

on the drive(s), backup your data before proceeding.

In Single Disk mode, a second drive can be inserted. The device recognizes the new drive

as an external disk.

Prerequisites:

• Single: Install one hard disk drive

• JBOD, RAID 0, RAID 1: Install two hard disk drives

Note:

Single mode supports the installation of a second drive (external disk).

1. Select Storage and click on the RAID Manager tab.

The current RAID mode is displayed above the available RAID modes, see the following

gure.

2. Click on a RAID mode, see RAID Types to select your preference.