User manual

English

2-9

connectinG tHe oMninas GettinG started

Powering On

Press to power on. The status LED starts to blink. This process may take 1 to 2 minutes.

Pressing Power Button

A blinking LED species that the system is in the powering-on state. A solid LED species that

the OMNINAS has obtained an IP address from the router (DHCP connection). See LED Deni-

tions for further information.

In the event of a Red Blinking LED state, the system has failed to obtain an IP address from the

router. The system settings reverts to the default xed IP address (169.254.100.200).

Status LED Display During Boot

Note:

Pressing the Power LED for less than a second disables the blue status LED. Pressing the

Power LED a second time (less than a second) enables the blue status LED.