User manual
English
3-30
usb ManaGeMent web interFace
Auto Copy
You can enable or disable auto copy from your SD or USB 3.0 (front side port) by conguring the
Auto Copy settings. Once enabled, you can insert a USB device or SD media and the
OMNINAS will automatically copy the contents from the source device to the designated folder
on the OMNINAS.
Note:
To perform auto copy, remove all backup jobs found on Backup -> Backup Setting List for
the respective target drive (SD /USB3.0).
Setting Up Auto Copy Function
1. From the Home menu, select USB and click Auto Copy.
2. Select the target port (SD or USB 3.0) to congure and click Enable.
3. Click the destination folder drop-down menu and select the destination folder.
This is the folder where all content will be copied once the source media is inserted into the
OMNINAS.
Selecting a Target Folder for Auto Copy