User manual

English

2-1

Hardware installation GettinG started

Hardware Installation

This section includes information to help you install the hard drives in the OMNINAS before you

can begin using your storage device.

First Instance

The following guidelines provide information for rst time installation of your OMNINAS. Before

you can get started on the conguration and setup, you will need to install hard drives on your

device.

IMPORTANT:

To prevent data loss or damage to the system, power down your device before removing a

HDD.

1. If your system is not powered down, press the Power button for three (3) seconds until an

audible beep sounds and the LED starts to blink.

2. On the bay cover, press in the indicator to open the cover. The cover pops open.

3. Extend the cover to allow access to the HDD trays.

2 1

Opening the HDD Bay Door