Datasheet

Product Specifications
www.shuttle.eu
Shuttle Computer Handels GmbH
Fritz-Strassmann-Str. 5
25337 Elmshorn | Germany
Tel. [phone]
Fax [phone]
[e-mail]
Pa
g
e 4 10 A
p
ril 2014
© 2014 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
VESA mount
The supplied 75/100mm VESA mount allows DS437T to be installed on to
walls or just to be affixed on the rear side of a monitor which is
particularly interesting for the industry segment, company buildings
and public institutions. Besides this, the chassis of DS437T provides
numerous threaded holes (M3) enabling it to be fitted almost
anywhere.
SD Card Reader
The built-in SD card reader at the front side makes it easy to transfer
files from your camera so you can share videos and photos on your
DS437T with ease. It supports SD, SDHC and SDXC memory flash cards
and also supports boot up from bootable SD cards.
13
24
Gnd Pwr
CMOS +5V
External power button by separate remote line
If because of space constraints (e.g. in the case of a fixed installation)
the machine cannot be switched on by pressing the front power
button, it can be powered on by a separate remote line. You will find
an appropriate four-pin-connector at the back panel of DS437T (pitch
2.54 mm). In addition, this connector also provides the Clear CMOS
function and an external 5VDC voltage supply.
Pin 1-3 Connect external power button (use a temporary switch)
Pin 3-4 Close these pins for 3 seconds to perform a Clear CMOS
Pin 2-3 External +5V DC voltage (Pin 3 = Ground).
Kensington Lock
This is a small, metal-reinforced hole as part of an anti-theft system.
DS437T provides an appropriate hole on both side of its chassis. The
lock-and-cable is not included.