User Manual
19
English
BIOS setup
4.1 About BIOS setup
4.1.1 When to use BIOS setup ?
4.1.2 How to run BIOS setup ?
You may need to run the BIOS Setup when:
・
An error message appears on the screen during the system
booting
up and is requested to run SETUP.
・ You want to change the default settings for customized
features.
・You want to reload the default BIOS settings.
To run the BIOS Setup Utility, turn on the computer and press the
[Del] or [F2] key during the POST procedure.
If the message disappears before you respond and you still wish
to enter Setup, either restart the system by turning it OFF and
ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
The setup function only can be invoked by pressing [Del] or [F2]
key during POST that provide an approach to change some
setting and conguration the user prefer, and the changed values
will save in the NVRAM and will take eect after the system
rebooted.
Press [F7] key for Boot Menu.
The default BIOS (Basic Input/Output System) is already properly
congured and optimized, there is normally no need to run this
utility.
CAUTION! We strongly recommend that you change the BIOS settings
only with the help of a trained service personnel.
NOTE : The drivers, BIOS and utilities bundled in the support DVD
may vary by models and are subject to change without notice.