Material Safety Data Sheet

ManualsBrandsShurhold ManualsAutomotiveShurhold Yacht Brite YBP-0202 Pro Polish Wax Bottle - 16 oz.

Pro Polish

Product and company identification1 .

Common name Pro Polish

Pro Polish is a fiberglass/gel coat cleaner, sealant/polish with UV inhibitors .

Supplier

Material uses

Manufacturer

In case of emergency :

CHEMTREC, U.S. : (800) 424-9300

International: (703) 527-3887

Shurhold Industries

3119 SW 42nd Avenue

Palm City, Florida 34990-5558

Toll free : 800-962-6241

Tel : (772) 287-1313

Fax : (772) 286-9620

Email : info@Shurhold.com

MSDS authored by: : Kemika XXI Inc. + 1-450-435-7475 10/30/2006

Conforms to ANSI Z400.1-2004 Standard (United States, Canada, Mexico).

Contact the supplier.

Dermal contact. Eye contact. Inhalation. Ingestion.

Hazards identification

Routes of entry

Potential acute health effects

Irritating to respiratory system.

Severely irritating to eyes.

No known significant effects or critical hazards.

Irritating to skin.

Eyes

Skin

Inhalation

Ingestion

Physical state Liquid.

See toxicological information (section 11)

Medical conditions

aggravated by over-

exposure

Repeated skin exposure can produce local skin destruction or dermatitis. Repeated or

prolonged contact with spray or mist may produce chronic eye irritation and severe skin

irritation.

2 .

Emergency overview : WARNING !

CAUSES SEVERE EYE IRRITATION.

CAUSES RESPIRATORY TRACT AND SKIN IRRITATION.

Avoid contact with skin and clothing. Avoid breathing vapor or mist. Keep container

closed. Use only with adequate ventilation. Wash thoroughly after handling.

Potential chronic health

effects

Carcinogenic effects: Classified A3 (Proven for animals.) by ACGIH [Distillates

(Petroleum), Hydrotreated Light]. Classified None. by NIOSH [Diethanolamine]. Classified

3 (Not classifiable for humans.) by IARC [Diethanolamine]. Classified None. by OSHA

[Isopropyl alcohol]. Classified A4 (Not classifiable for humans or animals.) by ACGIH, 3

(Not classifiable for humans.) by IARC [Isopropyl alcohol]. Classified None. by OSHA,

None. by NIOSH [Methanol].

Mutagenic effects: Classified None. for humans [Isopropyl alcohol].

Teratogenic effects: Not available.

Hazard status : This material is classified hazardous under OSHA regulations in the United States, the

WHMIS Controlled Product Regulation in Canada and the NOM-018-STPS-2000 in

Mexico.

Date of issue

10/30/2006

Page: 1/8

Summary of content (8 pages)

PAGE 1
Conforms to ANSI Z400.1-2004 Standard (United States, Canada, Mexico). Material Safety Data Sheet Pro Polish 1 . Product and company identification Common name Material uses Supplier Manufacturer In case of emergency MSDS authored by: : Pro Polish : Pro Polish is a fiberglass/gel coat cleaner, sealant/polish with UV inhibitors . : Shurhold Industries 3119 SW 42nd Avenue Palm City, Florida 34990-5558 Toll free : 800-962-6241 Tel : (772) 287-1313 Fax : (772) 286-9620 Email : info@Shurhold.
PAGE 2
Pro Polish 3 .
PAGE 3
Pro Polish Combustible liquid and vapor. Vapor may cause flash fire. Vapors may accumulate in low or confined areas or travel a considerable distance to a source of ignition and flash back. Runoff to sewer may create fire or explosion hazard. Special protective equipment for fire-fighters : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. 6 .
PAGE 4
Pro Polish TWA: 200 ppm 8 hour(s). Form: All forms. Mexico Product name Solvent naphtha (petroleum), heavy aliphatic Distillates (Petroleum), Hydrotreated Light Diethanolamine Engineering measures Personal protection Eyes Skin Respiratory Hands Exposure limits ACGIH TLV (United States). TWA: 10 mg/m3 8 hour(s). ACGIH TLV (United States, 1/2005). Skin TWA: 200 mg/m3 8 hour(s). Form: All forms. ACGIH TLV (United States, 1/2005). Skin TWA: 2 mg/m3 8 hour(s). Form: All forms. TWA: 0.46 ppm 8 hour(s).
PAGE 5
Pro Polish 10 . Stability and reactivity Stability and reactivity Incompatibility with various substances Hazardous polymerization Conditions of reactivity : The product is stable. : Reactive with oxidizing materials and acids. : Will not occur. : Flammable in the presence of the following materials or conditions: open flames, sparks and static discharge. Slightly flammable in the presence of the following materials or conditions: heat. 11 .
PAGE 6
Pro Polish 13 . Disposal considerations : The generation of waste should be avoided or minimized wherever possible. Avoid dispersal of spilled material, runoff and contact with soil, waterways, drains and sewers. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional and local authority requirements. Waste disposal 14 .
PAGE 7
Pro Polish : Class D-2A: Material causing other toxic effects (Very toxic). Class D-2B: Material causing other toxic effects (Toxic). WHMIS (Canada) CEPA DSL: All components listed. CEPA NDSL: C10-16 Alkenes Canadian NPRI: Methanol This product has been classified in accordance with the hazard criteria of the Canadian CPR, the United States OSHA and the Mexican NOM -018-STPS-2000. This MSDS contains all the information required by the CPR, OSHA, the American National Standard Institute (ANSI) Z400.
PAGE 8
Pro Polish Notice to reader To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.