UL4 UniPlex Lavalier Microphone Web guide for UniPlex UL4. Version: 1.
Shure Incorporated Table of Contents UL4 UniPlex Lavalier Microphone 3 General Description 3 Features 3 Lavalier Distance 3 Tie Clip 3 Snap-Fit Windscreen 4 Accessories 4 Furnished Accessories 4 Optional Accessories 4 Replacement Parts 5 Specifications 5 Frequency Response 7 Polar Pattern 8 Wiring and Termination 8 Typical Wiring Table 8 Converting LEMO to TA4F 9 MTQG Connector Assembly 9 Certifications 10 2/10
Shure Incorporated UL4 UniPlex Lavalier Microphone General Description The Shure UniPlex UL4 is a professional subminiature cardioid lavalier microphone that is ideal for speech applications in broadcast, corporate, and conference environments. The subminiature design and custom cardioid element provide robust au dio performance. Each microphone is supplied with a storage pouch, single tie clip, and snap-fit windscreen. Features • • • • • • • 5 mm cardioid subminiature design for discrete placement 1.
Shure Incorporated Tie Clip Snap-Fit Windscreen Accessories Furnished Accessories Furnished Acces sories UL4 Black UL4 Tan UL4 Cocoa UL4 White Single Tie Clip RPMDL4STC/B (1) RPMDL4STC/T (1) RPMDL4STC/C (1) RPMDL4STC/W (1) Snap-Fit Windscreen RPMUL4SFWS/B (1) RPMUL4SFWS/T (1) RPMUL4SFWS/C (1) RPMUL4SFWS/W (1) Case RPMDL4CASE RPMDL4CASE RPMDL4CASE RPMDL4CASE Preamplifier (UL4B/ C-XLR only) RPM400TQG N/A N/A N/A Accessories are available in Black (/B), Tan (/T), Cocoa (/C), and Wh
Shure Incorporated Lemo XLR Preamplifier RPM400LEMO Black Dual Tie Clip, qty.1 RPMDL4DTC/B White Dual Tie Clip, qty.1 RPMDL4DTC/W Tan Dual Tie Clip, qty.1 RPMDL4DTC/T Cocoa Dual Tie Clip, qty.1 RPMDL4DTC/C Replacement Parts RPMUL4SFWS/B UL4 SNAP-FIT WINDSCREEN, BLACK, QTY 3 RPMUL4SFWS/C UL4 SNAP-FIT WINDSCREEN, COCOA, QTY 3 RPMUL4SFWS/T UL4 SNAP-FIT WINDSCREEN, TAN, QTY 3 RPMUL4SFWS/W UL4 SNAP-FIT WINDSCREEN, WHITE, QTY 3 RPMDL4STC/B* SINGLE TIE CLIP, BLACK, QTY.
Shure Incorporated Frequency Response 40 Hz to 20 kHz Sensitivity MTQG -42 dBV/Pa [1] LEMO -37 dBV/Pa [1] Self-Noise, A-Weighted, Equivalent Acoustical MTQG 32 dB SPL-A LEMO 32 dB SPL-A Signal-To-Noise Ratio [2] MTQG 62 dB-A LEMO 62 dB-A Maximum SPL [3] 130 dB SPL,1 kHz at 1% THD, typical Dynamic Range 98 dB typical Microphone Current Draw 530 µA, maximum Bias Voltage Recommended Operating Voltage 3.55 V DC minimum, 5.
Shure Incorporated [1] 1 Pa=94 dB SPL [2] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted [3] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at spec ified SPL Dimensions UL4 A B C D Cable Length Cable Diameter Microphone Length Microphone Diameter 66 in. (1.67 m) 1.
Shure Incorporated Polar Pattern Wiring and Termination Typical Wiring Table Series Cable Con struc tion UL4MTQG 1.6 mm cable with 2 conduc tors, 2 shield wires and shield UL4LEMO 1.
Shure Incorporated Series Cable Con struc tion Electri cal De sign Re place ment Connec tor Polari ty For Use With Wiring Line Art (From Solder Side) and shield Converting LEMO to TA4F Series Cable Con struc tion UL4LEMO 1.
Shure Incorporated Assembled View Certifications Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per formance. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Global Compliance Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Email: info@shure.de www.shure.
