Specifications

Speaker Systems Recommended for your PRO MASTERTM
Model 703 PRO MASTER Stage Monitor
This is a rugged, professional, two-way monitor system
designed for years of hard on-stage use. It has two
8-inch speakers and a high-frequency driver coupled
to a
120" radial horn. Horn dispersion angle may be
reduced to 60" for tighter control of
foldback signal.
Can be positioned at 30" or 60" angle to the stage.
Maximum recommended amplifier output: 100 watts
continuous to 8 ohms. Frequency response: 100 Hz to
16 kHz. Impedance: 8 ohms.
Model 701 PRO MASTER Speaker System
A wide-range, high efficiency, lightweight, portable,
two-way speaker system-an ideal companion to the
Model 700 PRO MASTER Power Console. The Model
701 provides high
SPL sound reinforcement of wide
frequency range program material in every location
from the largest auditoriums to the most intimate clubs.
The speaker system consists of a 15-inch woofer in a
front-ported bass reflex cabinet, and a high-frequency
horn and driver combination with adjustmentfor either a
60" or 120" horizontal horn dispersion angle. Easily
biamped. Maximum recommended amplifier output to
8 ohms: 150 watts continuous. Frequency response: 50
Hz to 15 kHz. Impedance: 8 ohms.
Impedance: 16 ohms.
Speaker system
A compact, high-quality, two-way
speaker system designed for
localized sound
coverage in
on-stage monitor (foldback)
applications. The 702 may be used
with virtually any power amplifier
capable of delivering up to 50 watts
to a 16-ohm load. It can be placed in
either of two slanted positions
facing the performer. Built-in
volume control. Frequency
response: 100 Hz to 20 kHz.
Impedance: 16 ohms.
Model SR102 and SR103
Speaker Columns
Outstanding performance in
sound reinforcement systems.
These columns have a wide
frequency range, distortion-free
reproduction and high sound
penetration power. Model
SR102 is designed for portable
use and Model
SR103 for
permanent installation. Power
rating: 100 watts maximum to 16
ohms. Frequency response: 100 Hz
I
studio monitor and club
applications. They feature wide
frequency response, low distortion and smooth
dispersion characteristics, and are designed to
operate with amplifiers delivering up to 100 watts to an
8-ohm load. The
SR112B and SRI 12W are designed for
permanent installation
(SR112W is woodgrain finish),
and the
SR116B is portable for temporary installations.
Frequency response: 45 Hz to 16 kHz. Impedance: 8
ohms.