User Guide

Shure Incorporated
4/20
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
•
•
•
•
Manual pairing
Turn off the earphones.
Put the earphones on your head.
Press and hold button on the right adapter. Continue to hold after you hear “Power on”.
When you hear "Bluetooth pairing mode" (about 5 seconds), release the button.
From your audio source, select "Shure TW1."
After a pause (about 4 seconds) you will hear “Connected”.
Press and hold the button on the left adapter until you hear "Power on".
Notes: Secure Fit Adapters automatically pair with previously paired devices when you power them on. After a few seconds you will hear “Connected”.
To control listening features with your device, download the free ShurePlus PLAY app for iOS and Android.
Changing Sleeves
Gently twist and pull to remove sleeve.
Install the new sleeve so it completely covers the barb and nozzle.
Detachable Adapters
You may need to detach the earphones from the Secure Fit Adapters to attach optional components or to replace either one if
they become damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to
the earphone and connector.
Do not use pliers or other tools.
Grasp the connector and the earphone as close as possible to where they join.
Pull straight apart—do not twist. The connector is a snap fit, not threaded.
Note: If you pull at an angle, the connector will not detach.
Do not pull on the adapter or put any pressure on the earphone nozzle.
Listen for a click when connecting.
When reattaching the module, match the "L" and "R" markings. For clear earphones, match the color dots (Red=Right,
Blue=Left).
™