0/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications Earphone Resource Center Shure Earphones Sound Isolating™ Earphones Shure Sound Isolating™ Earphones, built with balanced armature speakers, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications Using Earphones Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove. Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber. http://pubs.shure.com/guide/EarphoneResourceCenter/enUS?_ga=2.37468128.1399458107.1506980900869970580.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center In small, medium, and large sizes. Made from pliable rubber. Publications Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands. Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve. Inserting the Earphones Carefully insert the earphone into the ear like an earplug, so that a tight seal is formed.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications The fit of the earphone can greatly affect sound quality. Wearing the Earphones The following are some suggested ways of wearing the earphones. http://pubs.shure.com/guide/EarphoneResourceCenter/enUS?_ga=2.37468128.1399458107.1506980900869970580.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications Wear the cable over the ear and secure it behind the head to help keep the earphones in place during physical activity. Tighten the cable and take up slack by raising the cable cinch. Changing Sleeves Twist and pull to remove the sleeve from the nozzle. Slide on a new sleeve so that it completely covers the barb and the nozzle. http://pubs.shure.com/guide/EarphoneResourceCenter/enUS?_ga=2.37468128.1399458107.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves). For more information on how to wear Shure Earphones, view the How to Change Shure Earphone Sleeves video tutorial.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications Note: Do not pull on cable to remove earphone. For more information on how to wear Shure Earphones, view the How to Properly Fit and Wear Shure Earphones video tutorial. Maintenance and Cleaning Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety. Keep the earphones and sleeves as clean and dry as possible.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Do not expose earphones to extreme temperatures. Publications Replace sleeves if they do not fit properly. Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure. Cleaning the Earphone Nozzle If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the Publications earphone sound filter. Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury. The cable connectors to the earphones may collect debris or other deposits that can affect audio quality.
/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications 1. Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red. 2. From your audio source, select "Shure BT1." 3. LED turns blue when successfully paired. Pairing Multiple Bluetooth Devices 1. Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red. 2. From your audio source, select "Shure BT1." 3.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center 1. Press and hold the center button on the second device until the LED flashes blue and red. Publications 2. Select the second device on your audio source. 3. LED turns blue on second device when successfully paired. Pairing Bluetooth Device to a PC If you are having difficulty pairing your BT1 earphones to your PC, you may need to update your drivers. Here are two ways to update your computer driver via the Intel ® website. 1.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Click once Publications Answer/End a call Click once Decline a call Press and hold, 3 seconds Activate voice assistant Phone on, press and hold, 3 seconds Erase all paired devices. Factory default settings Phone off, press and hold past "power on, Bluetooth pairing mode, battery life" messages to power down.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Red LED indicates low battery. Publications 1. Connect earphones to charging device using supplied cable. 2. LED is red while charging. 3. When earphones are charged, LED turns off. Warning: Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F). Note: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
10/2/2017 Shure Publications | User Guides | Earphone Resource Center A.) Yes, holding the center button on the remote for 3 seconds will activate Siri or other ® Publications voice service. (Source device dependent) Q.) How do I use voice commands? A.) Holding down the multi-function center button (power/answer/end call) for 3 seconds will prompt voice command software to enact. (Source device dependent) Q.) What device controls do the cable and earphones support? How do I use them? A.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center reflections are minimal. Similarly, the range can be much further in enclosed spaces, Publications where a lot of reflections of the signal are permitted.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center The MMCX connectors standard on most SE earphones, like the SE215 and SE846, mean Publications you don’t have to choose between wired and wireless—simply add an RMCE Remote + Mic accessory cable, RMCE-LTG (for iPhone 7 and iPhone 7 Plus), or the EAC64 replacement detachable cable (if the telephony features of the Remote + Mic cable isn’t required). Q.) What models of SE earphones is the RMCE-BT1 for? A.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center SE315 Publications Single High-Definition MicroDriver SE215 Single Dynamic MicroDriver SE112-BT1 Single Dynamic MicroDriver Sensitivity at 1 kHz SE535/535LTD Red 119 dBSPL/MW SE425 109 dBSPL/MW SE315 116 dBSPL/MW SE215 107 dBSPL/MW SE112 105 dBSPL/MW Impedance at 1 kHz http://pubs.shure.com/guide/EarphoneResourceCenter/enUS?_ga=2.37468128.1399458107.1506980900869970580.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Publications SE535/535LTD Red 36 Ω SE425 22 Ω SE315 27 Ω SE215 17 Ω SE112 16 Ω Frequency Range SE535 18 Hz–19 kHz SE535LTD Red 18 Hz–19 .5 kHz SE425 20 Hz–19 kHz SE315 22 Hz–18 .5 kHz SE215 http://pubs.shure.com/guide/EarphoneResourceCenter/enUS?_ga=2.37468128.1399458107.1506980900869970580.
10/2/2017 SE215 Shure Publications | User Guides | Earphone Resource Center Publications 22 Hz–17.5 kHz SE112 25 Hz–17 kHz Input Connector Gold-plated 3.5 mm (1/8”) stereo mini jack plug with 6.35 mm (1/4”) threaded adapter Net Weight SE535 30 g (1 oz.) SE425 30 g (1 oz.) SE315 30 g (1 oz.) SE112-BT1 17.5 g (0 .62 oz.) RMCE-BT1 13.8 g (0 .47 oz.) Operating Temperature SE535 -18°C to 57°C (0°F to 135°F) SE425 http://pubs.shure.com/guide/EarphoneResourceCenter/enUS?_ga=2.37468128.1399458107.
10/2/2017 SE425 Shure Publications | User Guides | Earphone Resource Center Publications -18°C to 57°C (0°F to 135°F) SE315 -18°C to 57°C (0°F to 135°F) SE215-BT1 0°C to 45°C (32°F to 113°F) SE112-BT1 0°C to 45°C (32°F to 113°F) Storage Temperature SE535 -29°C to 74°C (-20°F to 165°F) SE425 -29°C to 74°C (-20°F to 165°F) SE315 -29°C to 74°C (-20°F to 165°F) SE215-BT1 -10°C to 50°C (14°F to 122°F) SE112-BT1 -10°C to 50°C (14°F to 122°F) http://pubs.shure.com/guide/EarphoneResourceCenter/enUS?_ga=2.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Bluetooth Specifications Publications Antenna Information Type = Chip Gain = +2.13 dBi Bluetooth 4.1 Operating frequency = 2402MHz-2480MHz Modulation scheme = FHSS RF power = +5.38dBm (E.I.R.P.) BT1 Battery Specifications Battery Type Rechargeable Li-Ion Nominal Voltage 3.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center WARNING: This product contains a chemical known to the State of California to cause cancer and Publications birth defects or other reproductive harm. Note: Battery replacement to be performed only by Shure authorized service personnel. CAUTION: Follow applicable laws regarding mobile phone and headphone use while driving. This product contains magnetic material.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Note: Testing is based on the use of supplied and recommended cable types. The use of other than Publications shielded (screened) cable types may degrade EMC performance. Este equipo ha sido diseñado para operar con las antenas que enseguida se enlistan y para una ganancia máxima de antena de [+2.13] dBi. El uso con este equipo de antenas no incluidas en esta lista o que tengan una ganancia mayor que [+2.13] dBi quedan prohibidas.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center 現品表示記号は、以下のことを表しています。 この無線機器は 2.4GHz 帯の電波を使用 Publications し、変調方式は「FH-SS」方式、想定与干渉距離は 10m です。 2,400MHz～2,483.5MHz の全帯域を使用し、移動体識別装置の帯域を回避することはできません。 Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese Telecommunications Business Law (電気通信事業法).
10/2/2017 Shure Publications | User Guides | Earphone Resource Center Hereby, Shure Incorporated declares that the radio equipment is in compliance with Publications Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str.
10/2/2017 Shure Publications | User Guides | Earphone Resource Center If you believe this product is defective within the warranty period, carefully repack the Publications unit, insure it and return it with proof of purchase, postage prepaid, to Shure Incorporated, Attention: Service Department, at the address below. Outside of the United States, return the product to your dealer or Authorized Service Center. Addresses are listed on www.Shure.
