User Guide

Bluetooth
®
Pairing
1. Turn off the earphones. Press and hold center button on earphone remote
until the LED flashes blue and red.
2. From your audio source, select "Shure BT1."
3. LED turns blue when successfully paired.
Pairing Multiple Bluetooth
®
Devices
1. Turn off the earphones. Press and hold center button on earphone remote
until the LED flashes blue and red.
2. From your audio source, select "Shure BT1."
3. LED turns blue when successfully paired.
To pair second device:
1. Press and hold the center button on the second device until the LED
flashes blue and red.
2. Select the second device on your audio source.
3. LED turns blue on second device when successfully paired.
Pairing Bluetooth
®
Device to a PC
If you are having difficulty pairing your BT1 earphones to your PC, you may
need to update your drivers. Here are two ways to update your computer
driver via the Intel
®
website.
1. Manually: This requires that you locate your wireless adapter and then
download the specific driver update for that wireless adapter. Information
and drivers are located here: Manual Update.
2. Intel Update Utility: This requires you to download the update app, run
the app and allow it to scan your computer for required driver updates.
Download the app here: Intel Update Utility.
Note: The Intel Update Utility is recommended because it requires fewer
steps. Refer to your PC user manual for more information.
Using the BT1 Remote
The Center Button
Press and holdPower on
Press and hold, 5 secondsPower off
Press and hold, 10 secondsBluetooth pair
Click oncePlay/Pause
Click onceAnswer/End a call
Press and hold, 3 secondsDecline a call
Phone on, press and hold, 3 secondsActivate voice assistant
Phone off, press and hold past
"power on, Bluetooth pairing mode,
battery life" messages to power
down.
Erase all paired devices. Factory
default settings
Up and Down Buttons
Click + or -Volume Up/Down
Press and hold +, 3 secondsNext track
Press and hold -, 3 secondsPrevious track
Press and hold + and -, togetherCheck Battery Status
Note: Your phone may not be compatible with some functions.
Charging the Earphones
Red LED indicates low battery.
1. Connect earphones to charging device using supplied cable.
2. LED is red while charging.
3. When earphones are charged, LED turns off.
Warning: Before charging, make sure the product is at room temperature,
between 0 to 45°C (32 to 113°F).
Note: Use this product only with an agency approved power supply which
meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
Shure IncorporatedEarphone Resource Center Shure Earphones
3/82017/10/06