Earphone Resource Center -- Sound Isolating™ Earphones Safety Information WARNING FOR ALL EARPHONES! For safe and correct use of earphones, read this manual before use. Keep the manual and safety information in a convenient place for future reference. SAFETY PRECAUTIONS The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage.
Shure Incorporated blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. ONLY USE attachments/accessories specified by the manufacturer. 12.
Shure Incorporated WARNING • If water or other foreign objects enter the inside of the device, fire or electric shock may result. • Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. CAUTION • Never disassemble or modify the device, as failures may result. • Do not subject to extreme force and do not pull on the cable or failures may result. • Keep the microphone dry and avoid exposure to extreme temperatures and humidity.
Shure Incorporated • Do not attempt to modify this product. Doing so could result in personal injury and/or product failure. CAUTION • Do not immerse in water, such as while taking a bath or washing your face, otherwise sound deterioration or failures may result. • Do not use while sleeping as accidents may result. • Use a slow twisting motion to remove the earphones. Never pull on the earphone cord.
Shure Incorporated Este equipo ha sido diseñado para operar con las antenas que enseguida se enlistan y para una ganancia máxima de antena de [+2.13] dBi. El uso con este equipo de antenas no incluidas en esta lista o que tengan una ganancia mayor que [+2.13] dBi quedan prohibidas. La impedancia requerida de la antena es de [50] ohms.
Shure Incorporated Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese Telecommunications Business Law (電気通信事業 法). This device should not be modified (otherwise the granted designation number will become invalid). Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
Shure Incorporated Sound Isolating™ Earphones Shure Sound Isolating™ Earphones, built with balanced armature speakers, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and interchangeable Sound Isolating sleeves for a comfortable and personalized fit.
Shure Incorporated Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber. Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands. Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve. Inserting the Earphones Carefully insert the earphone into the ear like an earplug, so that a tight seal is formed.
Shure Incorporated Wear the cable over the ear and secure it behind the head to help keep the earphones in place during physical activity. Tighten the cable and take up slack by raising the cable cinch. Changing Sleeves • Twist and pull to remove the sleeve from the nozzle. • Slide on a new sleeve so that it completely covers the barb and the nozzle. Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle.
Shure Incorporated Note: Do not pull on cable to remove earphone. For more information on how to wear Shure Earphones, view the How to Properly Fit and Wear Shure Earphones (https://www.youtube.com/watch? v=5bgR_H3RFpE) video tutorial. Maintenance and Cleaning Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety. • Keep the earphones and sleeves as clean and dry as possible.
Shure Incorporated Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter. Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury. The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them using a dry cotton swab.
Shure Incorporated To pair second device: 1. Press and hold the center button on the second device until the LED flashes blue and red. 2. Select the second device on your audio source. 3. LED turns blue on second device when successfully paired. Pairing Bluetooth Device to a PC If you are having difficulty pairing your BT1 earphones to your PC, you may need to update your drivers. Here are two ways to update your computer driver via the Intel® website. 1.
Shure Incorporated Up and Down Buttons Volume Up/Down Click + or - Next track Press and hold +, 3 seconds Previous track Press and hold -, 3 seconds Check Battery Status Press and hold + and -, together Note: Your phone may not be compatible with some functions. Charging the Earphones Red LED indicates low battery. 1. Connect earphones to charging device using supplied cable. 2. LED is red while charging. 3. When earphones are charged, LED turns off.
Shure Incorporated Q.) How do I set up multi-point pairing? How do I change active devices? A.) Multi-point pairing, a feature of Bluetooth 4, is set up automatically—pair a second device (power cycle by holding the power button down until the earphones turn off, and press again for 7 seconds to enter pairing mode). The playback between devices should be triggered by new activity (incoming call, new playback).
Shure Incorporated Battery, Durability, Range and Charging Q.) Are my wireless Sound Isolating earphones IPX-rated for water resistance? Are they suited to exercise? A.) The BT1 is not IPX-rated for water resistance. However, the SE112 and SE215 comprise two of the most durable earphones available on the market today. The cable, transmitter/receiver, and remote + mic pod are subject to the same stringent battery of tests for moisture resistance that all of our earphones undergo.
Shure Incorporated Use with SE Earphones Q.) Why would I pick Bluetooth Sound Isolating earphones over wired Sound Isolating earphones? A.) Wireless Sound Isolating earphones provide the great sound of wired SE earphones with the freedom of motion that separating your playback device from your earphones offers. This is ideal for high-impact exercise (running, spin classes) where movement of the body may cause entanglement and result in an uncomfortable pull on the ears.
Shure Incorporated A.) Multi-point pairing is set up automatically—pair a second device (power cycle by holding the power button down until the earphones turn off, and press again for 7 seconds to enter pairing mode). The playback between devices should be triggered by new activity (incoming call, new playback). If devices do not automatically recognize the wireless earphones as an output device, manually disconnect and re-select in device settings. Q.
Shure Incorporated paired with the RMCE-BT2) are completely suitable for exercise. However, we cannot recommend use during any activities where awareness of surroundings are necessary (such as cycling or driving), and where prohibited by law. Q.) How long will the battery on my wireless Sound Isolating earphones last between charges? A.) When new, the BT2 battery will play back music for up to 10 hours, depending on volume and audio listened to. Q.
Shure Incorporated While the Bluetooth protocol defines standard range as up to 10 m (30 ft), the ideal distance between devices is significantly smaller, especially when outdoors where reflections are minimal. Similarly, the range can be much further in enclosed spaces, where a lot of reflections of the signal are permitted.
Shure Incorporated Specifications Transducer Type SE535/535LTD Red Triple balanced-armature drivers SE425 Dual balanced-armature drivers SE315 Single High-Definition MicroDriver SE215 Single Dynamic MicroDriver Sensitivity at 1 kHz SE535/535LTD Red 119 dB SPL/MW SE425 109 dB SPL/MW SE315 116 dB SPL/MW SE215 107 dB SPL/MW SE112 105 dB SPL/MW Impedance at 1 kHz SE535/535LTD Red 36 Ω 20/30
Shure Incorporated SE425 22 Ω SE315 27 Ω SE215 17 Ω SE112 16 Ω Frequency Range SE535 18 Hz –19 kHz SE535LTD Red 18 Hz –19 .5 kHz SE425 20 Hz –19 kHz SE315 22 Hz –18 .5 kHz SE215 22 Hz –17.5 kHz SE112 25 Hz –17 kHz Input Connector Gold-plated 3.5 mm (1/8”) stereo mini jack plug with 6.35 mm (1/4”) threaded adapter Net Weight SE535 30 g (1 oz.) SE425 30 g (1 oz.) SE315 30 g (1 oz.
Shure Incorporated Operating Temperature SE535 -18°C to 57°C (0°F to 135°F) SE425 -18°C to 57°C (0°F to 135°F) SE315 -18°C to 57°C (0°F to 135°F) Storage Temperature SE535 -29°C to 74°C (-20°F to 165°F) SE425 -29°C to 74°C (-20°F to 165°F) SE315 -29°C to 74°C (-20°F to 165°F) Integrated Microphone BT1 MEMS BT2 MEMS Polar Pattern BT1 Omnidirectional BT2 Omnidirectional 22/30
Shure Incorporated Sensitivity BT1 -11 dBV at 1 kHz (Pa=94 dB SPL) BT2 -38 dBV at 1 kHz (Pa=94 dB SPL) Compatible Earphones BT1 All Shure detachable earphones with MMCX connectivity BT2 All Shure detachable earphones with MMCX connectivity Compatible Sources BT1 Any A2DP Bluetooth stereo source BT2 Any A2DP Bluetooth stereo source Antenna Type BT1 Chip BT2 Chip 23/30
Shure Incorporated Antenna Gain BT1 +2.13 dBi BT2 +1.6 dBi Bluetooth Version BT1 4.1 BT2 5 Operating Frequency BT1 2402 to 2480 MHz BT2 2402 to 2480 MHz Modulation Type BT1 FHSS BT2 FHSS RF Output Power BT1 +5.38 dBm (E.I.R.P) BT2 +7.45 dBm (E.I.R.
Shure Incorporated Range BT1 10 m (32.8 ft) BT2 10 m (32.8 ft) Dimensions Cable Length SE112-BT1 760.0 mm (29.9in.) RMCE-BT1 790.0 mm (31.1in.) BT2 736.6 mm (29.0in.) Net Weight SE112-BT1 17.5 g(0.62 oz.) RMCE-BT1 13.8 g(0.47 oz.) BT2 18.0 g(0.63 oz.
Shure Incorporated Storage Temperature SE215-BT1 -10°C to 50°C (14°F to 122°F) SE112-BT1 -10°C to 50°C (14°F to 122°F) BT2 -10°C to 50°C (14°F to 122°F) Battery Type BT1 Rechargeable Li-Ion BT2 Rechargeable Li-Ion Nominal Voltage BT1 3.7 V DC BT2 3.
Shure Incorporated Charging Requirements USB Source BT1 5 V DC , 100 mA , minimum BT2 5 V DC , 100 mA , minimum Charging Time BT1 2 hours BT2 2 hours Quick Charge BT1 Up to 1.5 hours of play time with 15 minutes of charge time BT2 Up to 1.
Shure Incorporated Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.shure.com/europe/ compliance (http://www.shure.com/europe/compliance) Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str.
Shure Incorporated ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS AND, TO THE EXTENT NOT PERMITTED, ARE HEREBY LIMITED TO THE DURATION AND TERMS OF THIS WARRANTY. SHURE ALSO HEREBY DISCLAIMS ALL LIABILITY FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES.
Shure Incorporated Jogjakarta (0274) 371710 Denpasar (0361) 766788 Makasar (0411) 324652 30/30
