Troubleshooting guide

Printing
SHURE

P4800 System Processor Software Guide Page 88 of 108
PRINTING REPORTS _____________________________________
The P4800 software provides printed reports to document all of the presets and settings that are
stored in the device. These reports are designed for the following uses.
1. To document the device configuration for the customer and end user.
2. To provide a hard-copy backup so that if necessary the device configuration can be
reconstructed.
Note: The reports are output directly to the printer, rather than to a file, so
you must be connected to a printer to use this feature.
To print P4800 reports:
1. Select File>Print from the main menu.
2. The Choose Report dialog opens, as pictured to the right
in figure 62.
3. Click to select the report you would like to print.
4. A dialog will open for the report you have specified.
5. Specify the information to include in the report, as
described in the following section.
6. Click [OK].
7. The Windows Print dialog appears.
P4800 Reports
Device Information
The Device Information report lists all device-level information, except for the security
password. When the Device Information dialog opens, select the device for which you would
like to print a report from the [Device] pull-down list. Enter the information pertinent to the
selected device and click [OK]. The information you enter here appears only on the immediate
report; it is not stored for future use. Refer to page 90 for a sample of this report.
Figure 62 − Choose Report Dialog
Figure 63 − Device Information Dialog