Troubleshooting guide

Security
SHURE

P4800 System Processor Software Guide Page 86 of 108
Set the User Access Level
Once you create a password, the device is automatically
set to user access level one. If access to the device
must be further restricted, set the device to the
appropriate access level.
To set the user access level:
1. Go into Live Mode with the device.
2. Select [Security>Level] from the
main menu.
3. The Password Required dialog appears, as
pictured to the right in figure 59.
4. Enter the password and click [OK].
5. The Set Security dialog appears, as pictured
to the right in figure 60.
6. Click the radio button to the left of the
appropriate level.
7. Specify custom options for level two,
if applicable.
8. Click [OK].
Changing Device Security
In the event that changes to device configuration or security settings are required after access has been restricted,
you must first change the device security back to user access level one before you can continue.
Note: The security administrator password is required for these functions.
Changing the Access Level
Follow the instructions listed above for setting the access level.
Changing the Password
To change an existing password:
1. Go into Live Mode with the device.
2. Select [Security>Set Password] from the
main menu.
3. The Set Password dialog appears, as pictured to
the right in figure 61. The cursor is located in the
[Old Password] field.
4. Enter the current password.
5. T
AB to the [Administrator Password] field and enter
the new password.
6. T
AB to the [Confirm Password] field and retype the
new password.
7. Change the [Administrator Name] and [Phone or Contact info] if necessary.
8. Click [OK].
Note: All entries in the Set Password dialog are limited to a length of fifteen characters.
Figure 61 − Set Password Dialog
Figure 60 − Set Security Dialog
Figure 59 − Password Required Dialog