Troubleshooting guide

Modular Processors
SHURE

P4800 System Processor Software Guide Page 66 of 108
Parametric Equalizer
Parametric equalizers allow you to specify the placement, type and bandwidth of multiple filters anywhere in the
frequency spectrum between 25Hz and 20kHz. The System Processor provides the following types of
parametric equalizers:
Block Name Description
§ PEQ3
§ PEQ5
§ PEQ7
§ PEQ10
These processors provide peak/notch filters only.
§ PEQ3+CS
§ PEQ5+CS
§ PEQ7+CS
§ PEQ10+CS
These processors provide peak/notch filters, plus a low cut
or shelf filter and a high cut or shelf filter.
Function
Use this processor for precise equalization of room response without unnecessarily affecting
neighboring frequencies. Select a parametric equalizer based on the number of frequency bands you
need to adjust, and whether or not you would like to include cut or shelf filters in the processor. You
can conserve DSP by selecting the fewest filters that fit your needs.
Note: The number in the block name reflects the maximum number of peak/notch filters
available for that processor.
Figure 47 − PEQ Window