Troubleshooting guide

Fixed Processors
SHURE

P4800 System Processor Software Guide Page 39 of 108
Gain Controls
Use these controls to adjust the signal level of each output channel. First select the fader knob, then
adjust the level with the mouse, arrow keys, or specify a level in the value box. For complete
instructions on their operation, see Faders section on page 31. The adjustment range is from +30dB to
–30dB, and the default setting is 0dB, or unity gain.
Output Pad
Click this button to attenuate the signal output by –20dB. The default setting is inactive.
Pad activated
Pad inactive
Channel Mute
Click this button to mute the channel. The default setting is inactive.
Mute activated
Mute inactive
Channel Label
Use this text box to customize the output channel strip label in the signal flow diagram. The default
setting is “Untitled Out” for each output channel number.
Link Indicator
This displays the link status of the output channel. Any setting you change on a linked channel will be
changed for all other channels in the same link group. For a complete explanation of linking and link
groups, see the Linking section on page 25.
Channel linked
Channel not linked