Troubleshooting guide

Processor Features
SHURE

P4800 System Processor Software Guide Page 33 of 108
Snapshots
The snapshot feature is available in any processor parameter window that has a response curve or transfer
curve graph. It allows you to capture an image of the current curve, then display it for reference purposes as
you revise the processor settings. The processor remembers this snapshot until you take a new one in the
same processor window, or quit the application.
The following response curve examples are taken from the parameter window of a five-band parametric EQ
with cut and shelf filters (PEQ5+CS).
To use the snapshot feature:
1. Click the [TAKE] button,
as shown in figure 24.
This captures the current
response or transfer curve.
2. Click the [SHOW] button.
This displays the
snapshot behind
the current curve.
The button
appears lighted in green when the
snapshot is displayed.
Figure 24 − Taking a Snapsho
t
Fi
g
ure 25 − Resha
p
in
g
the Res
p
onse Curve
Note: When you show the snapshot before you have changed any processor settings,
it will be hidden behind the current curve. The snapshot will show up as soon as
you reshape the curve with different settings.
4. Click the [SHOW] button
again to toggle the
snapshot off and on, as
pictured on the right in
figure 26.
Fi
g
ure 26 − Hidin
g
the Sna
p
shot
3. Change the processo
r
settings. As you reshape the
curve, you will be able to
compare it to the snapshot o
f
the previous curve showing in
the background, as shown in
figure 25.