Troubleshooting guide

Saving a Configuration
SHURE

P4800 System Processor Software Guide Page 30 of 108
Device Backup
You can backup all presets stored in the device to a single archive, and restore this backup set to the device at a
later date. You must be in Design Mode to perform or restore a backup.
To backup all presets in the device:
1. Click on the [Design Mode] button on the
control bar.
2. Select [File>Backup Device] from the
main menu.
3. The Select Devices dialog will appear.
4. Select from the list of available devices and
click [Connect].
5. The Backup Device dialog appears, as
pictured on the right in figure 21.
6. Click [Backup Device].
7. The Save Backup As dialog appears, as
pictured below on the right in figure 22.
8. Navigate to the correct directory and type in a
file name.
9. Click [Save].
To restore a backup to the device:
1. Select [File>Restore Device] from the main menu.
2. The Open Backup dialog will appear, similar to the
Save Backup dialog pictured on the right in figure 22.
3. Navigate to the correct directory and select the
appropriate backup set from the list.
4. Click [Open].
5. The Select Devices dialog will appear.
6. Select from the list of available devices and click
[Connect]. This sends the backup set to the device.
Figure 21 − Backup Device Dialog
Figure 22 − Save Backup As Dialog