Troubleshooting guide

Saving a Configuration
SHURE

P4800 System Processor Software Guide Page 29 of 108
Rename a Preset
After you have stored a preset in the device, you can change its name and description in
Live Mode.
To rename a preset:
1. Click on the [Live Mode] button on the control bar.
2. Select the preset you wish to rename from the pull-down
menu in the information box on the control bar.
3. The main window will enter preview mode for the
selected preset.
4. Click the [Load] button on the control bar to make it the
live preset.
5. Click once anywhere in the information box.
6. The Rename Preset dialog will appear, as pictured to the
right in figure 19.
7. Type in the new name and/or description.
8. Click [OK].
Delete a Preset
From Design Mode you can delete presets from the device that are no longer in use.
To delete a preset:
1. Click on the [Design Mode] button
on the control bar.
2. Select [File>Delete Preset].
3. The Select Devices dialog will
appear.
4. Select from the list of available
devices and click [Connect].
5. The Delete Preset dialog will
appear, as pictured on the right
in figure 20.
6. Select the preset you wish to
delete, or S
HIFT+Click to select
multiple presets.
7. Click [Delete].
Note: The current live preset will not be available for deletion. If you need to delete this
preset, you must first select a different live preset.
Figure 19 − Rename Preset Dialog
Fi
g
ure 20 − Delete Preset Dialo
g