Troubleshooting guide

Saving a Configuration
SHURE

P4800 System Processor Software Guide Page 28 of 108
Preset Management
The System Processor can store at least sixteen and up to one hundred and twenty-eight presets in its device
memory, depending upon their complexity. Once presets are stored in the device, they can be renamed,
deleted, or backed up as a set.
Store a Preset in the Device
When you are connected to the device, in Design Mode you can store new signal flow configurations
to the device as presets, or open existing scene files and store them to the device.
To store a preset in the device:
1. In the main window, select [File>Store As Preset] from the
main menu, or if you are in Design Mode you can also click
the [Store Preset] button on the control bar.
2. The Select Devices dialog will appear, as pictured on the
right in figure 17.
3. Select from the list of available devices and click [Connect].
1. The Store Preset dialog will appear, as
pictured on the left in figure 18.
2. Type in a preset name of no more than
fifteen characters.
3. Type in a preset number, or accept
the default.
4. Type in a description (optional), which
will help identify the contents of the
preset for further operations.
5. Click [Store].
Figure 17 − Select Devices Dialog
Figure 18 − Store Preset Dialog